CAMMOO 评论监测在线报告

Excellent for the garage

It does move some air. High setting is a bit noisy but it pushes alot of air. Downside is the power cord should have been minimum 10ft long to accommodate high placement of fan, whereas you only get a 6ft cord. The control cord should be at minimum 6ft long not 3ft. I have to use a stick to control it cause I need it mounted high.

At first, we thought we could not install them to out tiki bar posts and tried to return them. The cost of return was greater than the purchase price. The seller offered a discount for us to keep it which we are very thankful we did. With some adaptation, we were able to install them and they are wonderful. Highly recommend it. To the seller, thank you.

These work great. However, during even first day of use, the oscillating part of one of the fans stopped working. I would have to fiddle with it many times by turning the switch off and on (power and oscillating) or force the fan to oscillate by hand to "catch" the motor to oscillate. I would return item, but already mounted on wall. Would hate to get a different brand that uses different mounting hole areas. The fan itself makes noise too as if something is loose. Not sure how long these will last. Time will tell

They look nice. That's about it. The amount of air they move is very underwhelming. I would definitely look at a different option these dont move very much air for an 18in fan.

The media could not be loaded. Fan blades are not that effective

Nice sturdy fan, for the price. However one of them has a horrible wobble. After only running both fans for roughly 15 min the motor housing became extremely hot. I wouldn’t think it’s a horrible issue. However putting these up in a barn gives me some concerns. I am not sure if that is normal for this band but I can tell you my last barn fan did not get that hot and it ran all day long. I would have liked to see these come with mounting screws or bolts as mine did not. The cord should be longer as it’s only 5 feet and not much to work with in any out door settings where extension cords get in the way.

It took us a while to get this one assembled and running but time is short on our hands these days! This assembled in less than 15 minutes and it is quite the beast of a fan! We are planning on mounting this on a mobile platform so we can roll it around outside on hot days to where ever we need it. The fan blows with decent power but the spraying option is a little hit or miss. The remote control works well but I wish it was detachable. The noise level runs at an average sound than a house fan, maybe a little bit louder. There doesn't seem to be any oscillation, you can only point it in the direction of where you want the air to travel. This is a great conpact garage fan that you can hang up and out of the way and is a very rigid piece of equipment!

They didn't mention the c.f.m in their advertising unlike other companies. I ordered two installed one ,I couldn't fill air movement three feet away . They advertise this fan to blow 30 plus feet was very disappointed. But my installation was on a covered boat house on a 8x8 with no back stop . Maybe install on a wall, probably may have a different outcome. Amazon did make right

Did not get what I paid for. Missing most all parts. Nothing but excuses from seller

BEWARE: The touch screen is very intermittent and often unresponsive. If the fan loses power, it won’t return to the previous state. When you try to turn it back on using the touch screen, it may not register your finger on the first try—or even the second or third.... You could end up spending 5–10 minutes fiddling with the on/off controls to get it working again.I bought this fan in April 2026 for about $90. Since then, the price has dropped to $69.99, and I noticed complaints similar to mine appear to have been removed—or the reviews look like they were cleaned up when the price was lowered. This seems to be a common issue with the controller (touch screen), and now the reviews don’t appear to mention the flaw as much.It’s a shame, because the fan itself works well when it’s running and uses low power. If you buy this fan, be prepared to be extremely frustrated with the touch screen operation. Good luck—you’ve been warned.

Work great for two weeks then blew a breaker today. Neither fan nor control work now. Attempting to get support from seller. We'll see how this goes. Worst part about it is that it will cost $1,000 to remove and repace, and re-seal everything.

So far I am very impressed at this price! I wanted a attic exhaust fan that draws as little power as possible and why I bought this EC motor version. On low (setting 1 of 10), the unit is drawing around 15 watts. I measured on high (setting 10 of 10) the unit is drawing around 50 watts which is much better than the 70 watts published in the ad. The build quality seems very good. The motor is very quite, although the shutters do make a little rattling sounds, which is not a issue for my application. What impressed me the most is the amount of air it moves on high (at only 50 watts)! I was not expecting it to be so much. I wish I had a way to measure it, but I feel its more than what the ad says. Anyway, I am very happy so far and hoping for good reliability.

Works Great

The legs slide out way too much when pressing the pedals, regardless of how much you tighten the knobs. Mine are stripped out already.Had to improvise and drill holes to get my steering wheel and pedals to fit regardless of being on the compatible models list. Piece of junk unless you like to Jerry rig stuff. Definitely not worth the price.

The construction is great. But the execution is awful. There’s no slot to hold you chair, the stand folds into itself when you brake. It’s a shame because if the company made some minor adjustments, this stand would be a steal, even at a slightly higher price point.

Product is generally fairly stable and sturdy, the literal only discrepancy I have with it is it doesn't fit the bolts for the Moza R5, or the RATSP hand brake/7+1 shifter, I had to use clamps to fasten them to the stand, and the positioning of the handbrake and shifter tray is a little too far forward, and is a little uncomfortable for longer use. Other than that, decent product, works great, and is a pleasure to use, pretty highly adjustable, just wish I could move the shifter/handbrake tray a little closer.

I do like but there a few flaws where the shifter and E brake doesn’t hold well I had to add blocks of wood to make it fit and not make it move.. also where the steering wheel sit on should be a wide because my barely fits.. but it still nice even after I add screws to mount the pedals, so it wouldn’t move..

I bought this to hold my Moza wheelbase and Fantec pedals. Everything fit decently, but the final result has left some to be desired. I couldn't fit all 4 of the rubber feet at the bottom since one of the screw holes wasn't drilled out all the way, meaning that the rubber foot couldn't go in. So I only have the rubber feet on the front, but not the back. The cup holder doesn't have a bottom, so small diameter cups will just fall through. The metal that this is made out of is sturdy and won't dent. The build was simple to assmble and the part that took longest was attatching the wheel and pedals. The stand will shake if you use a hand brake or gear box. I also don't think there's enough space to fit both a hand brake or gear box. I think this was good value for money tho. I'm still going to use this to practice racing but I'll definetely need to figure out how to keep it planted.

These were great. You need to fill the bottom with water on Stand was missing water cover but overall worked perfectly

Originally was going to put it in the camper but didn’t. Used it for a hunting shack. It works as it should but there are not safety ratings. Before I put it in an expensive camper and put my kids in there I want to know it’s been tested as safe by a third party. Just didn’t feel comfortable with it. It works as it should, it gets hot, and there is no end of hot water, but it will work your propane tank pretty hard. If you have a heater going you might need to have this on a second tank. Between a heater and water heater on the same tank I would question if the tank would freeze up from propane being used so fast.

A little intimidating to install but ended up being pretty straightforward & didn't take nearly as long as I expected - pretty good instructions & fits in the compartment perfectly. Comes in a huge box, really well packaged for safe shipping. Tankless water heaters are serious game changers for camping/anywhere - this uses less propane overall (per doesn't have to keep heating a little water tank & only uses gas when need hot water), can make really hot water & is super-fast (I don't have to turn on the hot water in the shower & then wait a while for lukewarm water). Quiet & easy to adjust the settings. I appreciate that it comes with a hand shower so you can hose off outside if you wanted/needed. Reasonably priced for how great it works. I recommend.

Very heavy and usable for crowd control

Build quality is good. Can probably handle up to 9nm with no problems. It looks pretty good once assembled. However, it did take a while to put together as I had to make adjustments. Steering wheel seems to be a bit far from the chair even with it as close as possible to the front. It definitely does not fit a 50” TV. Very stable. Good value for money. The shifter plate/mount is a bit shaky when shifting.

Advertised to fit Thrustmaster T128, however it doesn't fit the T128. The desk clamp on the T128 does not fit around the mounting plate support.

Nice air flow, but i don't like the remote control, no more than 5 feet

This is a heavy duty air mover. It is big, heavy, and loud but it is perfect for my workshop. The remote works well.It was a pain to put together -- there are three different types of connecters to attach the front cover to the back. We couldn't get the covers to completely line up straight so ours looks a little odd but it works.This review is for CAMMOO CAMMOO 20 Inch Wall Mount Fan Oscillating, Button & 32ft Wireless Remote Dual Control, 6.6ft Extended Power Cord, Supports 3-Speed, 8H Timer, Sleep & Natural Mode, High Velocity Wall Fan, 1 Pack

These don’t work with remote our buttons on the fan don’t work poor quality not reliable if they take a hour to try and turn on or off have to unplug to turn off

The media could not be loaded. Super disappointed in the performance of this fan:- no listing of # of CFM's- very loud at low speed, it moves air, but damn it is loud- remote would not shut it off, the display power turns off, but the fan continues to run

Customer service is the best. We ordered 4 fans for installation in our horse barn - the closed motor w/ remote and covers make it ideal. Unfortunately, one of them was damaged in transit. Two others had minor issues that didn't affect overall use but did make it more difficult to install. We contacted the seller and the issue was promptly solved by having them send replacement. Although the fans aren't perfect (I feel this brand is harder to mount than some of the others) they work well - powerful and reasonably quiet, but the customer service is exceptional and that increased my rating from 4 to 5 stars. Would do business again.

very nice built fans but not for what we wanted them for. more industrial setting than for closed in season porch. great maybe for garage.....

It is great. Used in my gym.Wished instructions had dimensions for placement and setup. To make the install easier.

Holds the wheel and shifter ok but the A frame doesn't open nearly enough and the pedals are directly under the steering wheel so if you are taller than I'd say 5'8" be prepared to do a good amount of DIY adjustments. I'm 6'1" and I've had to fix the pedals at the very end of the plate but that caused the plate to lift everytime I hit the brake so using ty-raps I McGyvered something to hold the plate in place because there's nothing that's originaly part of the design to do so. Also there's nothing for cable management so ty-raps were needed there too. The screws to fix the equipment to the stand don't come with it so I had to salvage screws from the cup holder and the shifter plate to fix the wheel and pedals. I wish the upper part of the frame that slides inside the A frame was at an angle toward the driver, that would've fix a lot of issues with this setup.